ServerLIFT SL-350X Hand-Cranked Data Center Lift
The gold standard alternative to motorized lifts, the ServerLIFT SL-350X Hand-Cranked Data Center Lift is the recommended choice for occasional server moves of equipment up to 350 lbs (159 kg). Each feature is designed to reduce joint stress and enable accurate alignment of data center equipment, and with no charging required. With the ServerLIFT SL-350X Hand-Cranked Data Center Lift, one tech can safely and single-handedly load, transport, position, and install equipment weighing up to 350 lbs (159 kg).
Moving IT hardware by hand, even lightweight 2U and 4U servers, quickly becomes a physical and logistical pain for all data center operations. The ServerLIFT SL-350X Hand-Cranked Data Center Lift was built with this in mind, offering an intuitive and easy-to-use solution for lighter IT hardware in any data center environment. Server support goes up to 52U high (8 ft or 2.44 m) to allow for easy and safe transport from the dock to the rack, and back again. It can also traverse ramps and floor gradients (max. angle of 6 degrees).
The ServerLIFT SL-350X Hand-Cranked Data Center Lift features a durable and ergonomic design in a light-duty unit. The powerful hand crank offers mechanically-advantaged lifting of IT equipment weighing up to 350 lbs (159 kg), meaning a tech no longer has to team up for risky manual lifts. Use the ServerLIFT SL-350X Hand-Cranked Data Center Lift within aisles as narrow as 36″ wide (91 cm). Tilt and angle the server or other equipment by up to 2 degrees using the stable, micro-leveling platform.
The gold standard alternative to motorized lifts, the ServerLIFT SL-350X Hand-Cranked Data Center Lift is the recommended choice for occasional server moves of equipment up to 350 lbs (159 kg). Each feature is designed to reduce joint stress and enable accurate alignment of data center equipment, and with no charging required. With the ServerLIFT SL-350X Hand-Cranked Data Center Lift, one tech can safely and single-handedly load, transport, position, and install equipment weighing up to 350 lbs (159 kg).
Moving IT hardware by hand, even lightweight 2U and 4U servers, quickly becomes a physical and logistical pain for all data center operations. The ServerLIFT SL-350X Hand-Cranked Data Center Lift was built with this in mind, offering an intuitive and easy-to-use solution for lighter IT hardware in any data center environment. Server support goes up to 52U high (8 ft or 2.44 m) to allow for easy and safe transport from the dock to the rack, and back again. It can also traverse ramps and floor gradients (max. angle of 6 degrees).
The ServerLIFT SL-350X Hand-Cranked Data Center Lift features a durable and ergonomic design in a light-duty unit. The powerful hand crank offers mechanically-advantaged lifting of IT equipment weighing up to 350 lbs (159 kg), meaning a tech no longer has to team up for risky manual lifts. Use the ServerLIFT SL-350X Hand-Cranked Data Center Lift within aisles as narrow as 36" wide (91 cm). Tilt and angle the server or other equipment by up to 2 degrees using the stable, micro-leveling platform.
- UL-Listed
- Occasional Server Moves
- Electric Lift Alternative
- Lighter IT Hardware
| Specifications | |
| Maximum Load Capacity: 350 lbs (159 kg) | |
| Maximum Lift Height: 8 ft (2.44 m) / 52U high | |
| Aisle Width Requirement: 36" wide (91 cm) | |
| Tilt Capability: Up to 2 degrees | |
| Maximum Ramp/Floor Gradient: 6 degrees | |
| Lift Type: Hand-cranked (manual) | |
| Footprint (WxLxH): 24 x 44 x 69 inches | |
| Weight (unloaded): 360 lb (163 kg) | |
| Shipping Dimensions (WxLxH): 26 x 45 x 78 inches | |
| Shipping Weight: 462 lb (210 kg) |
Documents
