IOLAN SDG P Secure Device Servers
Forsecure serial to Ethernetconnectivity applications the utilizePower over Ethernet (PoE)sources, theIOLAN SDG PoE Device Serveris the most advanced compact product available on the market today. Delivering high performance in a compact size, an IOLAN SDG P offers extensive security, flexibility and next generation IPv6 technology making it ideal for applications that require remote device/console management, data capture or monitoring.
TheIOLAN SDG P Device Serverhas full PoE support and operates as a Powered Device under IEEE 802.3af supporting end-span and mid-span power sources (PSE). Some other serial device servers that claim compliancy with 802.3af are in fact restricted to using mid-span power sources – buyer beware.
The IOLAN SDG P also has Inrush Current Protection to protect the device from input current rushes that may occur during power up. With this protection theIOLAN SDG PoE Device Serverbegins with a low current draw stage to protect the power sourcing device (PSD), and then switches to a high current stage allowing the IOLAN SDG P to draw its required power up a maximum 12.95 watts.
Forsecure serial to Ethernetconnectivity applications the utilizePower over Ethernet (PoE)sources, theIOLAN SDG PoE Device Serveris the most advanced compact product available on the market today. Delivering high performance in a compact size, an IOLAN SDG P offers extensive security, flexibility and next generation IPv6 technology making it ideal for applications that require remote device/console management, data capture or monitoring.
TheIOLAN SDG P Device Serverhas full PoE support and operates as a Powered Device under IEEE 802.3af supporting end-span and mid-span power sources (PSE). Some other serial device servers that claim compliancy with 802.3af are in fact restricted to using mid-span power sources - buyer beware.
The IOLAN SDG P also has Inrush Current Protection to protect the device from input current rushes that may occur during power up. With this protection theIOLAN SDG PoE Device Serverbegins with a low current draw stage to protect the power sourcing device (PSD), and then switches to a high current stage allowing the IOLAN SDG P to draw its required power up a maximum 12.95 watts.
| Specifications | |
| Lifetime limited warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222625 ECCN: 5A992 | |
| CPU | |
| Processor 600 Mhz ARM processor | |
| Memory | |
| RAM 512 MB | |
| Flash 4000 MB | |
| Interface Ports | |
| Number of Serial Ports 4 or 8 | |
| Serial Port Interface Software selectable EIA-232/422/485 on RJ45 | |
| Sun / Solaris Sun / Oracle ‘Solaris' Safe - no break signal sent during power cycle causing costly server re-boots or downtime | |
| Serial Port Speeds 300bps to 230Kbps with customizable baud rate support | |
| Data Bits Configurable for 5,6,7 or 8-bit protocol support Use TruePort to transparently pass 9-bit serial data | |
| Parity Odd, Even, Mark, Space, None | |
| Flow Control Hardware, Software, Both, None | |
| Serial Port Protection 15Kv Electrostatic Discharge Protection (ESD) | |
| Local Console Ports RS232 on Serial Port | |
| Network Autosensing 1000Base-T / 100Base-TX / 10Base-T Auto-MDIX Software selectable Ethernet speed 10/100/1000 Auto / Software selectable Half/Full/Auto duplex | |
| Ethernet Isolation 1.5Kv Magnetic Isolation | |
| Power | |
| Power over Ethernet 802.3af PoE compliant data pins (1/2, 3/60 or unused pins 4/5, 7/8) (48v DC) | |
| Power Supply Options Power via External power 9-30v DC, 4.8 Watts uses standard 5.5mm x 9.5mm x 2.1mm barrel socket, Power IN over serial cable | |
| Nominal Input Voltage 12v DC / 24v DC on Barrel Connector | |
| Input Voltage Range 9-30v DC on Barrel Connector | |
| Power External Device via Serial Port +5v DC regulated, 1W max | |
| Typical Power Consumption @ 12v DC (Watts) 4 Port: 2.0 8 Port: 2.7 Does not include power for devices connected to serial port | |
| Indicators | |
| LEDs Power/Ready Network Link Network Link Activity Serial: Transmit and Receive data per port | |
| Environmental Specifications | |
| Heat Output (BTU/HR) 4 Port: 16.38 8 Port: 9.20 | |
| MTBF (Hours) 4 Port: 177,932 Hours 8 Port: 126,364 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30°C | |
| Operating Temperature 0°C to 55°C, 32°F to 131°F | |
| Storage Temperature -40°C to 66°C, -40°F to 150°F | |
| Humidity 5 to 95% (non condensing) for both storage and operation. | |
| Case SECC Zinc plated sheet metal (1 mm) | |
| Ingress Protection Rating IP40 | |
| Mounting Wall or Panel mounting, DIN Rail mounting kit optional | |
| Weight and Dimensions | |
| Weight 4 Port: 0.35 kg (0.77 lbs) 8 Port: 0.55 kg (1.20 lbs) | |
| Dimensions not including mounting tabs 4 Port: 112 x 82 x 28 (mm), 4.4 x 3.2 x 1.1 (in) 8 Port: 112 x 156 x 28 (mm), 4.4 x 6.1 x 1.1 (in) | |
| Dimensions including mounting tabs 4 Port: 112 x 105 x 28 (mm), 4.4 x 4.2 x 1.1 (in) 8 Port: 113 x 179 x 28 (mm), 4.4 x 7.1 x 1.1 (in) | |
| Packaging | |
| Shipping Dimensions 260 x 170 x 70 (mm), 10.2 x 6.7 x 2.8 (in) | |
| Shipping weight 4 Port: 0.54 Kg (1.2 lbs) 8 Port: 1.3 kg (2.9 lbs) | |
| Regulatory Approvals | |
| Emissions CFR47 FCC Part 15 Subpart B:2015 ICES-003:2016 Issue 6:2016 CISPR 32 / EN 55032 EN55011 (CISPR11) CISPR 16-2-3:2010/A2:2014 EN61000-3-2:2014, Limited for Harmonic Current Emissions EN61000-3-3:2013, Limits of Voltage Fluctuations and Flicker | |
| Immunity CISPR 35 / EN 55035 EN61000-4-2: 2009 Electrostatic Discharge EN61000-4-3: 2006/A2:2010: RF Electromagnetic Field Modulated EN61000-4-4: 2004 Fast Transients EN61000-4-5: 2006 Surge EN61000-4-6: 2009 RF Continuous Conducted EN61000-4-8: Power-Frequency Magnetic Field EN61000-4-11: Voltage Dips and Voltage Interruptions | |
| Safety UL/EN/IEC 62368-1 (previously 60950-1) CAN/CSA C22.2 No. 62368-1 |
Documents
