INJ 1100-T DIN Rail PoE Injectors with electrical isolation
INJ 1100-T PoE Injectorsare DIN Rail mounted single port,PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to injectfully compliantpower over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side.
Generatingup to 60 Watts, the INJ 1100-T provides electrical power to remotePD access points,pan-tilt and zoom (PTZ) camerasandvideo-phones. It complies with theIEEE802.3bt Hi-PoE (60W of power)orIEEE 802.3at PoE+ (30W of power)standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).Learn more about PoE.
With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
INJ 1100-T PoE Injectorsare DIN Rail mounted single port,PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to injectfully compliantpower over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side.
Generatingup to 60 Watts, the INJ 1100-T provides electrical power to remotePD access points,pan-tilt and zoom (PTZ) camerasandvideo-phones. It complies with theIEEE802.3bt Hi-PoE (60W of power)orIEEE 802.3at PoE+ (30W of power)standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).Learn more about PoE.
With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
- DIN Rail Enclosure
- Power Over Ethernet (PSE)
- Electrical isolation of the internal power supply unit
- Potential Separation
- On-board PoE Power Controller
- Advanced Power Management
| Specifications | |
| 1 Year Return to Factory Warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43223300 ECCN: 5A991 | |
| Serial interface | |
| Interface 1 Ethernet | |
| Connection method RJ45 socket | |
| Transmission length 100 m (including patch cables) | |
| Power Connector 1:1 | |
| Basic functions PSE/Midspan, compliant with IEEE 802.3af, at | |
| Serial transmission speed 10/100/1000 Mbps | |
| Output nominal voltage 54 V DC (PoE) | |
| Output power INJ 1100-T 27030098 30 W INJ 1110-T 27030098 60 W | |
| Maximum output power INJ 1100-T 27030098 40 W INJ 1110-T 27030098 75 W | |
| Interface 2 Ethernet | |
| Connection method RJ45 CAT5e | |
| Ambient conditions | |
| Ambient temperature (storage/transport) -40°C ... 85°C | |
| Permissible humidity (operation) 10 % ... 95 % (non-condensing) | |
| General | |
| Electrical isolation VCC // FE // PoE | |
| Test voltage data interface/power supply 1.5 kV AC (50 Hz, 1 min.) | |
| Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU | |
| Mounting position vertical | |
| Net weight 324.72 g | |
| Housing material Plastic | |
| Color Gray | |
| MTTF (SN 29500 standard, temperature 25°C , operating cycle 21 % (5 days a week, 8 hours a day) ) INJ 1100-T 27030098 2342 Years INJ 1110-T 27030098 3062 Years | |
| MTTF (SN 29500 standard, temperature 40°C , operating cycle 34.25 % (5 days a week, 12 hours a day) ) INJ 1100-T 27030098 1167 Years INJ 1110-T 27030098 1397 Years | |
| MTTF (SN 29500 standard, temperature 40°C , operating cycle 100 % (7 days a week, 24 hours a day) ) INJ 1100-T 27030098 467 Years INJ 1110-T 27030098 558 Years | |
| Conformance CE-compliant | |
| UL, USA UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4 | |
| UL, USA/Canada Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4 Class I, Division 2, Groups A, B, C, D | |
| UL, Canada CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16 | |
| Standards and Regulations | |
| Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU | |
| Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 | |
| Test result 10 Hz ... 57 Hz, amplitude ±3.5 mm, 57 Hz ... 150 Hz, 5g | |
| Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27 | |
| Test result 30g for 11 ms, three shocks in each spatial direction | |
| Type of test Continuous shock according to EN 60068-2-27/IEC 60068-2-27 | |
| Test result 10g for 16 ms, 1000 shocks in each spatial direction | |
| Standards/regulations EN 61000-4-2 | |
| Contact discharge ± 6 kV (Test Level 3) | |
| Indirect discharge INJ 1100-T 27030098 ± 6 kV INJ 1110-T 27030098 | |
| Standards/regulations EN 61000-4-3 | |
| Frequency range 80 MHz ... 3 GHz (Test Level 3) | |
| Standards/regulations EN 61000-4-4 | |
| Comments Criterion B | |
| Standards/regulations EN 61000-4-5 | |
| Signal ± 1 kV (Data line, asymmetrical) ± 2 kV (I/O cable on field side only, asymmetric) | |
| Standards/regulations EN 61000-6-4 EN 61000-4-6 | |
| Frequency range 0.15 MHz ... 80 MHz | |
| Conformance CE-compliant | |
| UL, USA UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4 | |
| UL, USA/Canada Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4 Class I, Division 2, Groups A, B, C, D | |
| UL, Canada CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16 | |
| Noxious gas test ISA-S71.04-1985 G3 Harsh Group A | |
| Dimensions | |
| Width 30.2 mm | |
| Height 130 mm | |
| Depth 120 mm | |
| Note | |
| Utilization restriction 1 | |
| Power supply | |
| Nominal supply voltage 24 V DC 48 V DC | |
| Supply voltage range 18 V DC ... 57 V DC | |
| Max. current consumption INJ 1100-T 27030098 2.1 A 1.4 A (24 V DC) 0.7 A (48 V DC) INJ 1110-T 27030098 4.2 A 2.73 A (24 V DC) 1.34 A (48 V DC) | |
| Power consumption ≤ 75 W | |
| Protective circuit Reverse polarity protection | |
| Conductor cross section flexible max. 4.00 mm² | |
| Conductor cross section flexible min. 0.75 mm² | |
| Conductor cross section solid max. 4.00 mm² | |
| Conductor cross section solid min. 0.75 mm² | |
| Conductor cross section AWG max. 12 | |
| Conductor cross section AWG min. 20 | |
| Environmental Product Compliance | |
| REACH SVHC Lead 7439-92-1 | |
| China RoHS Environmentally friendly use period: unlimited = EFUP-e |
Documents
