IDS-710HP Managed Industrial Ethernet Switch

The IDS-710HP is a 10 port Managed Ethernet Switch that can operate in industrial environments providing advanced performance and enabling real-time deterministic network operation. Eight 10/100/1000-Base-T Ethernet ports are available for networking Gigabit and Fast Ethernet devices. The two SFP slots support 10/100/1000 on Copper or 1G/2.5G on Fiber.

In addition to transmitting network data, a the IDS-710HP has a built-in Power over Ethernet injector to supply up to 100W Power over Ethernet (PoE Type 3 & Type 4) per port for a total of 450W across all 8 ports. This is ideal for powering standards-based 802.3af, 802.3at, and 802.3bt compliant devices such as such as pan-tilt-zoom (PTZ) security cameras with heaters, 802.11ax/ac wireless access points, alarms, traffic controllers, sensors, and tracking devices. Classified as Layer 2 Power Sourcing Equipment (PSE), the switch will detect if connected devices are POE-compatible and automatically supply power. Using a PoE Switch saves on installation and maintenance costs by eliminating the need to install multiple pieces of equipment, additional electrical wires, and outlets. This flexibility allows for easy adaptation to network growth and changes.

The SFP slots allow for flexible network configurations usingSFP transceivers supplied by Perle,Ciscoor other manufacturers of MSA compliant SFPs. In addition, they make utilizing fiber is easy in environments where high levels of electromagnetic interference (EMI) is a common phenomenon, like industrial plants. This interference can cause data corruption over copper-based Ethernet links. However, data transmitted over fiber optic cable is completely immune to this type of noise ensuring optimal data transmission across the plant floor.

Power Over Ethernet (PSE)
Advanced Power Management
PD Power Reset
Powered Device Support
Simple deployment
Security
Resiliency
Manageability
Industrial Ethernet Protocol Support
Rugged design for harsh environments
Reliable operation
Real-time Ethernet performance

Specifications
5 Year Return to Factory Warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222612 ECCN: 5A992
PoE
450W total PoE power for the unit. Support for full 802.3bt (90W) on 5 Ethernet ports simultaneously 54 VDC nominal 52-57 VDC (PoE++ IEEE 802.3bt Type 4), 100W max per port 54 VDC nominal 50-57 VDC (PoE++ IEEE 802.3bt Type 3), 60W max per port 54 VDC nominal 50-57 VDC (Poe+ IEEE 802.3at Type 2), 30W max per port 48 VDC nominal 44-57 VDC (PoE 802.3af or IEEE 802.3at Type 1), 15.4W max per port
Power
Dual Power Input Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. Nominal with voltage software sensing 44-57VDC, common positive or common negative 54 VDC nominal 52-57 VDC (PoE++ IEEE 802.3bt Type 4), 9.5A Max. 54 VDC nominal 50-57 VDC (PoE++ IEEE 802.3bt Type 3), 9.5A Max. 54 VDC nominal 50-57 VDC (Poe+ IEEE 802.3at Type 2), 5A Max. 48 VDC nominal 44-57 VDC (PoE 802.3af or IEEE 802.3at Type 1), 3A Max.
Power & Alarm Connector 2 x 4-Pin Removable Terminal Blocks Grounding screw on metal chassis
Maximum Current Consumption @57 vDC 9 amps
Maximum Power Consumption @57 vDC 480 watts
Overload Current Protection Fused overload current protection
Reverse polarity protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45 8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
SFP Two empty slots Fixed and Multi speed SFP support: 10/100/1000 on SFP Copper & 1G/2.5G on SFP Fiber
USB Serial Console port MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections
Alarm Relay
NO (Normally Open) dry contact. 1A @ 24V
Switch Properties
Microprocessor Frequency ARM Cortex A8 600MHZ
RAM & Flash 4GB DDR3 & 4GB eMMC
Standards IEEE 802.3 for 10Base-T and 2500Base-T IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000BaseX and 2500BaseX IEEE 802.3u for 100Base-TX and 100Base-FX Energy Efficient Ethernet (EEE) as per 802.3az. IEEE 802.3x for Flow Control IEEE 1588 – 2008 (in software only) 802.1x
Processing Type Store and Forward
MAC Address Table Size 8K
VLAN ID range 1 to 4000
IGMP groups 1024
Packet Buffer Memory 1 Mbit
Jumbo Frame Size 10 KB
Indicators
System Indicates whether the switch O/S is operating normally
RJ45 Ethernet These integrated colored LEDs indicate link, activity and speed for each port.
Fiber Link Fiber link LED indicates Link and Data Activity
Alarm The alarm LED (Red) will be turned on under alarm conditions
Reset Once pushed all 4 LEDs are solid Red for 3 seconds
Environmental Specifications
MTBF 192,408 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30°C
Operating Temperature Ranges IDS-710HP: -10°C to 60°C (14°F to 140°F). IDS-710HP-XT: -40°C to 70°C (-40°F to 158°F)
Storage Temperature Range -40°C to 85°C (-40°F to 185°F)
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Maximum Heat Output 13.99 Btu/hr without PoE 39.95 Btu/hr with PoE
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Metal with an IP20 ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit
Product Weight and Dimensions
Weight 0.48kg (1.06lb)
Dimensions (W x H x D) 130 x 130 x 45mm (5.1 x 5.1 x 1.8in)
Packaging
Shipping Weight 0.64kg (1.41lb)
Shipping Dimensions 25 x 17 x 7 cm ( 9.84 x 6.7 x 2.75 in)
Standards and Certifications
Safety CE Mark UL/IEC 61010-1 and UL/IEC 61010-2 UL/EN/IEC 62368-1 CAN/CSA C22.2 No. 62368-1
Emissions FCC 47 Part 15 Class A ICES-003 EN61000-6-4 (Emissions for industrial environments) CISPR 32 / EN 55032 EN61000-3-2
Immunity CISPR 35 / EN 55035 IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 4kv, Air discharge +/- 8kv IEC/EN 61000-4-3 (RS) : 80mhz to 16hz ; 20v/m, 1.5hkz to 2.0ghz ; 10 v/m, 2.0ghz to 2.7 ghz ; 5 v/m IEC/EN 61000-4-4 (EFT) : DC power line +/- 2kv, data line +/- 1kv IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kv, Line/Earth +/- 2kv, data line /earth +/- 2kv IEC/EN 61000-4-6 (CS) :150mhz-80mhz 10vrms IEC/EN 61000-4-8 (Magnetic Field) :30 A/M EN 61000-4-11 IEC/EN 61000-6-2 (General Immunity in Industrial Environments)
Contents Shipped Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide