IDS-710CT Managed Industrial Ethernet Switches

The IDS-710CT is a ten-port Managed Ethernet Switch that can operate in industrial environments, providing advanced performance and enabling real-time deterministic network operation. Eight 10/100/1000-Base-T Ethernet ports are available for networking Gigabit and Fast Ethernet devices. The two 1000Base-X fiber connectors canextend Gigabit Ethernet operating distances over fiber up to 160km (100 miles).

Using fiber is essential in settings that frequently experience high electromagnetic interference (EMI), such as industrial plants. This interference can cause data corruption over copper-based Ethernet links. However, data transmitted over fiber optic cable is immune to this noise ensuring optimal data transmission across the plant floor.

Perle Industrial-grade Ethernet Switches are designed to withstand extreme temperatures, surges, vibrations, and shocks in industrial automation, government, military, oil and gas, mining, and outdoor applications. These rugged fanless switches are hardened to provide superior reliability in -10 to 60°C. Or choose the IDS-710-XT, where every component has been designed and tested to handle operating temperatures between -40 and 70°C.

Simple deployment
Security
Resiliency
Manageability
Industrial Ethernet Protocol Support
Rugged design for harsh environments
Reliable operation
Real-time Ethernet performance

Specifications
5 Year Return to Factory Warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222612 ECCN: 5A992
Power
Dual Power Input Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. (9.6 to 60 VDC) Common negative
Power & Alarm Connector 8-Pin Removable Terminal Block. Grounding screw on metal chassis
Maximum Current Consumption @24 vDC 0.25 amps
Maximum Power Consumption @24 vDC 6 watts
Overload Current Protection Fused overload current protection
Reverse polarity protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
USB Serial Console port MicroUSB Type B female port for serial console management. Used as an alternative port for out-of-band management connections
RJ45 8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
Gigabit Fiber Port Duplex SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable Simplex (BIDI, single strand) SC connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable PC and UPC type patch cords supported.
Alarm Relay
NO (Normally Open) dry contact. 1A @ 24V
Switch Properties
Microprocessor Frequency ARM Cortex A8 600MHZ
RAM & Flash 4GB DDR3 & 4GB eMMC
Standards IEEE 802.3 for 10Base-T and 2500Base-T IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000BaseX and 2500BaseX IEEE 802.3u for 100Base-TX and 100Base-FX Energy Efficient Ethernet (EEE) as per 802.3az. IEEE 802.3x for Flow Control IEEE 1588 – 2008 (in software only) 802.1x
Processing Type Store and Forward
MAC Address Table Size 8K
VLAN ID range 1 to 4000
IGMP groups 1024
Packet Buffer Memory 1 Mbit
Jumbo Frame Size 10 KB
Indicators
System Indicates whether the switch O/S is operating normally
RJ45 Ethernet These integrated colored LEDs indicate link, activity and speed for each port.
Fiber Link Fiber link LED indicates Link and Data Activity
Alarm The alarm LED (Red) will be turned on under alarm conditions
Reset Once pushed all 4 LEDs are solid Red for 3 seconds
Environmental Specifications
MTBF 250009 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30°C
Operating Temperature Ranges IDS-710: -10°C to 60°C (14°F to 140°F). IDS-710-XT: -40°C to 70°C (-40°F to 158°F)
Storage Temperature Range -40°C to 85°C (-40°F to 185°F)
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Maximum Heat Output 27 Btu/hr
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Metal with an IP20 ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit
Product Weight and Dimensions
Weight 0.35 kg / 0.77 lb
Dimensions (W x H x D) 45 x 93 x 109 mm / 1.77 x 3.66 x 4.29 in
Packaging
Shipping Weight 0.50 kg / 1.1 lb
Shipping Dimensions 25 x 17 x 7 cm / 9.84 x 6.7 x 2.75 in
Standards and Certifications
Laser Safety EN 60825-1 Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.
Safety CE Mark UL/IEC 61010-1 and UL/IEC 61010-2 UL/EN/IEC 62368-1 CAN/CSA C22.2 No. 62368-1
Emissions FCC 47 Part 15 Class A ICES-003 EN61000-6-4 (Emissions for industrial environments) CISPR 32 / EN 55032 EN61000-3-2
Immunity CISPR 35 / EN 55035 IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 4kv, Air discharge +/- 8kv IEC/EN 61000-4-3 (RS) : 80mhz to 16hz ; 20v/m, 1.5hkz to 2.0ghz ; 10 v/m, 2.0ghz to 2.7 ghz ; 5 v/m IEC/EN 61000-4-4 (EFT) : DC power line +/- 2kv, data line +/- 1kv IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kv, Line/Earth +/- 2kv, data line /earth +/- 2kv IEC/EN 61000-4-6 (CS) :150mhz-80mhz 10vrms IEC/EN 61000-4-8 (Magnetic Field) :30 A/M EN 61000-4-11 IEC/EN 61000-6-2 (General Immunity in Industrial Environments)
Contents Shipped Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide