IDS-509PP – Managed Industrial PoE+ Switch

TheIDS-509PPis a9 port Managed Ethernet Switchthat can operate inindustrial 10/100/1000-Base-T environmentsproviding advanced performance and enablingreal-time deterministic network operation. These PoE Switches are classified asPower Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, the IDS-509PP have up to eight (8) ports that alsoprovide up to 30 watts of powerto Powered Devices (PDs) such aswireless access points, Voice over IP phonesandIP cameras. Learn moreabout PoE.

PerleIndustrial-grade Ethernet Switchesare designed to stand up toextreme temperatures, surges, vibrations, andshocksfound inindustrial automation, government, military, oil and gas, miningandoutdoor applications.

Perle’sFast Setup featureprovides simplePlug and Playinstallation to get your Ethernet devices networked immediately. The familiarCommand Line Interface (CLI),via in-band Telnet or the out-band serial console port,will be appreciated byCCNA(Cisco Certified Network Associate) andCCNP(Cisco Certified Network Professional) trained engineers.

Simple deployment
PD Power Reset
Security
Resiliency
Manageability
Industrial Ethernet Protocol Support
Rugged design for harsh environments
Reliable operation
Real-time Ethernet performance

Specifications
5 Year Return to Factory Warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222612 ECCN: 5A992
Power
Dual Power Input Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 54 VDC nominal 50-57 VDC 48 VDC nominal 44 to 57 VDC
Power Connector 4-Pin Removable Terminal Block. Grounding screw on metal chassis
Overload Current Protection Fused overload current protection
Reverse polarity protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45 PoE Ports 8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V Amount of available power to PoE ports is dependent upon sufficient voltage and power being supplied to the switch To supply 30 Watts to PoE+ (IEEE 802.3at type 2) PDs, the power input must be 54 VDC nominal To supply 15 Watts to PoE (IEEE 802.3af/at type 1) PDs, the power input must be 48 VDC nominal
RJ45 port (non-PoE) 1 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
RJ45 Serial Console port RJ45 DTE Optional rolled and straight thru RJ45 cables and DB adapters are available
USB Serial Console port MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections
Digital Inputs Two Digital Inputs are provided that can be used for generation of alarms (SNMP trap, energizing of on-board Alarm Relay,etc)
Removable Storage
MicroSD slot A MicroSD flash card can be inserted for configuration files and firmware backup and restoration
Alarms
Alarm Relay NC (Normally Closed), NO (Normally Open) dry contact. 1A @ 24V
Switch Properties
Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.3at Power Over Ethernet
Processing Type Store and Forward
MAC Address Table Size 8K
VLAN ID range 1 to 4094
IGMP groups 1024
Packet Buffer Memory 1 Mbit
Indicators
Power This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
System Indicates whether the switch O/S is operating normally
RJ45 Ethernet These integrated colored LEDs indicate link, activity and speed for each port.
Alarm The alarm LED (Red) will be turned on under alarm conditions
P-Ring Master LED Status of the P-Ring Master
Backup Network Coupling Indicates whether or not the “Backup Network Coupling” feature is enabled (Redundant links connecting two P-Ring networks)
External Configuration DIP Switches
RM When enabled, designates this switch as the P-Ring Master
BC Activate Backup Coupling between 2 ring networks
Environmental Specifications
Operating Temperature Ranges Standard temperature models (Std): -10°C to 60°C (14°F to 140°F) XT Industrial extended temperature models (Ind) : -40°C to 75°C (-40°F to 167°F)
Storage Temperature Range Minimum range of -25°C to 70°C (-13°F to 158°F). -40°C to 85°C (-40°F to 185°F) for industrial extended temperature models
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Metal with an IP20 ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit
MTBF 107,501 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30°C
Product Weight and Dimensions
Weight 0.79kg (1.74 lbs)
Dimensions (W x H x D) 13 x 12.3 x 10.6 cm (5.12 x 4.84 x 4.17 in)
Packaging
Shipping Weight 1.1kg (2.43lbs)
Shipping Dimensions 20 x 19 x 18 cm (7.87 x 7.48 x 7.09 in)
Standards and Certifications
Safety UL/EN/IEC 62368-1 CAN/CSA C22.2 No. 62368-1 UL 60950-1 IEC 60950-1(ed 2); am1, am2 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 UL 61010-1 and UL 61010-2-201 (Standard for Safety for Programmable Controllers) Formerly known as UL508 UL/IEC 61010-1 UL/IEC 61010-2 CE Mark
Emissions FCC 47 Part 15 Class A CISPR 32 / EN 55032
Immunity CISPR 35 / EN 55035 IEC/EN 61000-4-2 (ESD) IEC/EN 61000-4-3 (RS) IEC/EN 61000-4-4 (EFT) IEC/EN 61000-4-5 (Surge) IEC/EN 61000-4-6 (CS) IEC/EN 61000-4-8 (Magnetic Field) IEC/EN 61000-6-2 (General Immunity in Industrial Environments)
Hazardous Locations (Hazloc) ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D (formerly known as UL 1604) ATEX Class 1 Zone 2
Contents Shipped Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide