IDS-509GPP Managed Industrial PoE+ Switch with Gigabit Fiber
TheIDS-509GPPis a9 port Managed PoE+ Switchthat can operate inindustrial environmentsproviding advanced performance and enablingreal-time deterministic network operation. These PoE Switches are classified asPower Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, the IDS-509GPP has 6 ports that alsoprovide up to 30 watts of powerto Powered Devices (PDs) such aswireless access points, Voice over IP phonesandIP cameras. Learn moreabout PoE.
Choose any combination of10/100/1000-Base-T Ethernet copper portsand1000Base-X fiber portsto meet the needs of your environment.
In addition to extending links over greater distances,utilizing fiber is critical in industrial plantswhere high levels of electromagnetic interference or EMI is a common phenomenon. This interference can cause corruption of data over copper-based Ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise ensuring optimal data transmission across the plant floor.
TheIDS-509GPPis a9 port Managed PoE+ Switchthat can operate inindustrial environmentsproviding advanced performance and enablingreal-time deterministic network operation. These PoE Switches are classified asPower Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, the IDS-509GPP has 6 ports that alsoprovide up to 30 watts of powerto Powered Devices (PDs) such aswireless access points, Voice over IP phonesandIP cameras. Learn moreabout PoE.
Choose any combination of10/100/1000-Base-T Ethernet copper portsand1000Base-X fiber portsto meet the needs of your environment.
In addition to extending links over greater distances,utilizing fiber is critical in industrial plantswhere high levels of electromagnetic interference or EMI is a common phenomenon. This interference can cause corruption of data over copper-based Ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise ensuring optimal data transmission across the plant floor.
- Simple deployment
- PD Power Reset
- Security
- Resiliency
- Manageability
- Industrial Ethernet Protocol Support
- Rugged design for harsh environments
- Reliable operation
- Real-time Ethernet performance
| Specifications | |
| 5 Year Return to Factory Warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222612 ECCN: 5A992 | |
| Power | |
| Dual Power Input Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 54 VDC nominal 50-57 VDC 48 VDC nominal 44 to 57 VDC | |
| Power Connector 4-Pin Removable Terminal Block. Grounding screw on metal chassis | |
| Overload Current Protection Fused overload current protection | |
| Reverse polarity protection The positive and negative inputs can be reversed providing safe and simple power connectivity. | |
| Access Ports | |
| RJ45 / PoE Ports 6 shielded RJ45 PoE ports for 10/100/1000Base-T up to 100 meters (328 ft) or 6 shielded RJ45 PoE ports for 10/100/1000Base-T up to 100 meters (328 ft) plus 1 non-PoE RJ45 port for 10/100/1000Base-T up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V Amount of available power to PoE ports is dependent upon sufficient voltage and power being supplied to the switch To supply 30 Watts to PoE+ (IEEE 802.3at type 2) PDs, the power input must be 54 VDC nominal To supply 15 Watts to PoE (IEEE 802.3af/at type 1) PDs, the power input must be 48 VDC nominal | |
| RJ45 Serial Console port RJ45 DTE Optional rolled and straight thru RJ45 cables and DB adapters are available | |
| USB Serial Console port MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections | |
| Digital Inputs Two Digital Inputs are provided that can be used for generation of alarms (SNMP trap, energizing of on-board Alarm Relay,etc) | |
| Gigabit Fiber port 2 or 3 1000Base-x fiber port models Duplex SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable PC and UPC type patch cords supported. | |
| Alarms | |
| Alarm Relay NC (Normally Closed), NO (Normally Open) dry contact. 1A @ 24V | |
| Removable Storage | |
| MicroSD slot A MicroSD flash card can be inserted for configuration files and firmware backup and restoration | |
| Switch Properties | |
| Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z 1000BASE-X IEEE 802.3x for Flow Control IEEE 802.3at Power Over Ethernet | |
| Processing Type Store and Forward | |
| MAC Address Table Size 8K | |
| VLAN ID range 1 to 4094 | |
| IGMP groups 1024 | |
| Packet Buffer Memory 1 Mbit | |
| Indicators | |
| Power This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs | |
| System Indicates whether the switch O/S is operating normally | |
| RJ45 Ethernet These integrated colored LEDs indicate link, activity and speed for each port. | |
| Fiber Link Fiber link LED indicates Link and Data Activity | |
| Alarm The alarm LED (Red) will be turned on under alarm conditions | |
| P-Ring Master LED Status of the P-Ring Master | |
| Backup Network Coupling Indicates whether or not the “Backup Network Coupling” feature is enabled (Redundant links connecting two P-Ring networks) | |
| External Configuration DIP Switches | |
| RM When enabled, designates this switch as the P-Ring Master | |
| BC Activate Backup Coupling between 2 ring networks | |
| Environmental Specifications | |
| Operating Temperature Ranges Standard temperature models (Std): -10°C to 60°C (14°F to 140°F). XT Industrial extended temperature models (Ind) : -40°C to 75°C (-40°F to 167°F) | |
| Storage Temperature Range Minimum range of -25°C to 70°C (-13°F to 158°F). -40°C to 85°C (-40°F to 185°F) for industrial extended temperature models | |
| Operating Humidity Range 5% to 90% non-condensing | |
| Storage Humidity Range 5% to 95% non-condensing | |
| Operating Altitude Up to 3,048 meters (10,000 feet) | |
| Chassis Metal with an IP20 ingress protection rating | |
| Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit | |
| MTBF 2 fiber port models : 99,059 Hours 3 fiber port models: 95,317 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30°C | |
| Product Weight and Dimensions | |
| Weight 0.79kg (1.74 lbs) | |
| Dimensions (W x H x D) 13 x 12.3 x 10.6 cm (5.12 x 4.84 x 4.17 in) | |
| Packaging | |
| Shipping Weight 1.1kg (2.43lbs) | |
| Shipping Dimensions 20 x 19 x 18 cm (7.87 x 7.48 x 7.09 in) | |
| Standards and Certifications | |
| Safety UL/EN/IEC 62368-1 CAN/CSA C22.2 No. 62368-1 UL 60950-1 IEC 60950-1(ed 2); am1, am2 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 UL 61010-1 and UL 61010-2-201 (Standard for Safety for Programmable Controllers) Formerly known as UL508 UL/IEC 61010-1 UL/IEC 61010-2 CE Mark | |
| Emissions FCC 47 Part 15 Class A CISPR 32 / EN 55032 | |
| Immunity CISPR 35 / EN 55035 IEC/EN 61000-4-2 (ESD) IEC/EN 61000-4-3 (RS) IEC/EN 61000-4-4 (EFT) IEC/EN 61000-4-5 (Surge) IEC/EN 61000-4-6 (CS) IEC/EN 61000-4-8 (Magnetic Field) IEC/EN 61000-6-2 (General Immunity in Industrial Environments) | |
| Hazardous Locations (Hazloc) ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D (formerly known as UL 1604) ATEX Class 1 Zone 2 | |
| Contents Shipped Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide |
Documents
