IDS-409G Managed Industrial Ethernet Switch with Gigabit Fiber

TheIDS-409Gis a9 port Managed Ethernet Switchthat can operate inindustrial environmentsproviding advanced performance and enablingreal-time deterministic network operation. Choose any combination of10/100/1000-Base-T Ethernet copper portsand1000Base-X fiber portsto meet the needs of your environment.

Utilizing fiber is criticalin environments, like industrial plants, wherehigh levels of electromagnetic interference (EMI)is a common phenomenon. This interference can cause data corruption over copper-based Ethernet links. However, data transmitted over fiber optic cable is completely immune to this type of noise ensuring optimal data transmission across the plant floor.

With over 82 models, the Perle IDS-409G offers a choice of connectors, fiber types, temperature support and operating distances.

Simple deployment
Resiliency
Manageability
Rugged design for harsh environments
Reliable operation
Real-time Ethernet performance

Specifications
5 Year Return to Factory Warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222612 ECCN: 5A991
Power
Dual Power Input Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. (9.6 to 60 VDC) 24 VAC Nominal (18 to 30 VAC)
Power Connector 4-Pin Removable Terminal Block. Grounding screw on metal chassis
Maximum Current Consumption @24 vDC 3 Fiber ports = 0.66 amps
Maximum Current Power @24 vDC 3 Fiber ports = 15.7 watts
Overload Current Protection Fused overload current protection
Reverse polarity protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45 6 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
RJ45 Serial Console port RJ45 DTE Optional rolled and straight thru RJ45 cables and DB adapters are available
USB Serial Console port MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections
Digital Inputs Two Digital Inputs are provided that can be used for generation of alarms (SNMP trap, energizing of on-board Alarm Relay,etc)
Fast Ethernet Fiber ports 3 1000Base-x fiber port models Duplex SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable Simplex (BIDI, single strand) SC connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable PC and UPC type patch cords supported.
Alarms
Alarm Relay NC (Normally Closed), NO (Normally Open) dry contact. 1A @ 24V
Switch Properties
Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z 1000BASE-X IEEE 802.3x for Flow Control
Processing Type Store and Forward
MAC Address Table Size 8K
VLAN ID range 1 to 4000
IGMP groups 1024
Packet Buffer Memory 1 Mbit
Indicators
Power This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
System Indicates whether the switch O/S is operating normally
RJ45 Ethernet These integrated colored LEDs indicate link, activity and speed for each port.
Fiber Link Fiber link LED indicates Link and Data Activity
Alarm The alarm LED (Red) will be turned on under alarm conditions
P-Ring Master LED Status of the P-Ring Master
Backup Network Coupling Indicates whether or not the “Backup Network Coupling” feature is enabled (Redundant links connecting two P-Ring networks)
External Configuration DIP Switches
S2 When enabled, designates this switch as the Ring Master
S1 Activate Backup Coupling between 2 ring networks
Environmental Specifications
MTBF 3 Fiber ports = 105,797 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30°C
Operating Temperature Ranges Standard temperature models (Std): -10°C to 60°C (14°F to 140°F). XT Industrial extended temperature models (Ind) : -40°C to 75°C (-40°F to 167°F)
Storage Temperature Range Minimum range of -25°C to 70°C (-13°F to 158°F). -40°C to 85°C (-40°F to 185°F) for industrial extended temperature models
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Maximum Heat Output 3 Fiber ports = 53.7 Btu/hr
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Metal with an IP20 ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit
Product Weight and Dimensions
Weight 0.64kg (1.41lbs)
Dimensions (W x H x D) 13 x 12.3 x 7.5 cm (5.12 x 4.84 x 2.95 in)
Packaging
Shipping Weight 0.94kg (2.07lbs)
Shipping Dimensions 20 x 19 x 18 cm (7.87 x 7.48 x 7.09 in)
Standards and Certifications
Safety UL/EN/IEC 62368-1 CAN/CSA C22.2 No. 62368-1 UL 60950-1 IEC 60950-1(ed 2); am1, am2 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 UL 61010-1 and UL 61010-2-201 (Standard for Safety for Programmable Controllers) Formerly known as UL508 UL/IEC 61010-1 UL/IEC 61010-2 CE Mark
Emissions FCC 47 Part 15 Class A CISPR 32 / EN 55032
Immunity CISPR 35 / EN 55035 IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 4kv, Air discharge +/- 8kv IEC/EN 61000-4-3 (RS) : 80mhz to 1Ghz ; 20v/m, 1.5hkz to 2.0ghz ; 10 v/m, 2.0ghz to 2.7 ghz ; 5 v/m IEC/EN 61000-4-4 (EFT) : DC power line +/- 2kv, data line +/- 1kv IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kv, Line/Earth +/- 2kv, data line /earth +/- 2kv IEC/EN 61000-4-6 (CS) :150mhz-80mhz 10vrms IEC/EN 61000-4-8 (Magnetic Field) :30 A/M IEC/EN 61000-6-2 (General Immunity in Industrial Environments)
Hazardous Locations (Hazloc) ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D (formerly known as UL 1604) ATEX Class 1 Zone 2 EN 60079-0:2012+A11:2013 and EN 60079-15:2010
Contents Shipped Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide