IDS-205G – Managed Industrial Ethernet Switch with Gigabit Fiber

TheIDS-205Gis a5 port Managed Ethernet Switchthat can operate inindustrial environmentsproviding advanced performance and enablingreal-time deterministic network operation. Four 10/100/1000-Base-T Ethernet ports are available for networking Gigabit and Fast Ethernet devices. One 1000Base-X fiber connection is available toextend Gigabit Ethernet operating distances over fiber.

In industrial plants,where high levels of electromagnetic interference (EMI) is a common phenomenon, utilizing fiber is critical. EMI can cause data corruption over copper-based Ethernet links. However, data transmitted over fiber optic cable is completely immune to this type of noise ensuring optimal data transmission across the plant floor.

PerleIndustrial-grade Ethernet Switchesare designed to stand up toextreme temperatures, surges, vibrations, andshocksfound inindustrial automation, government, military, oil and gas, miningandoutdoor applications.

Simple deployment
Resiliency
Manageability
Rugged design for harsh environments
Reliable operation
Real-time Ethernet performance
Energy Efficient Ethernet(EEE)

Specifications
5 Year Return to Factory Warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222612 ECCN: 5A991
CCATS Number: G167960
Power
Dual Power Input Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. (9.6 to 60 VDC)
Power Connector 4-Pin Removable Terminal Block. Grounding screw on metal chassis
Maximum Current Consumption @24 vDC 0.14 amps
Maximum Power Consumption @24 vDC 3.4 watts
Overload Current Protection Fused overload current protection
Reverse polarity protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45 4 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
RJ45 Serial Console port RJ45 DTE Optional rolled and straight thru RJ45 cables and DB adapters are available
Gigabit Fiber port 1000Base-x fiber port models Duplex SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable Simplex (BIDI, single strand) SC or ST connector Multimode 50/125 or 62.5/125 micron fiber cable Single mode 9/125 micron fiber cable PC and UPC type patch cords supported.
Alarms
Alarm Relay NC (Normally Closed) dry contact. 1A @ 24V
Switch Properties
Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000BaseX Energy Efficient Ethernet (EEE) as per 802.3az. IEEE 802.3x for Flow Control
Processing Type Store and Forward
MAC Address Table Size 8K
VLAN ID range 1 to 4000
IGMP groups 1024
Packet Buffer Memory 1 Mbit
Jumbo Frame Size 10 KB
Indicators
Power This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
System Indicates whether the switch O/S is operating normally
RJ45 Ethernet These integrated colored LEDs indicate link, activity and speed for each port.
Fiber Link Fiber link LED indicates Link and Data Activity
Alarm The alarm LED (Red) will be turned on under alarm conditions
P-Ring Master LED Status of the P-Ring Master
Backup Network Coupling Indicates whether or not the “Backup Network Coupling” feature is enabled (Redundant links connecting two P-Ring networks)
Environmental Specifications
MTBF 277,426 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30°C
Operating Temperature Ranges Standard temperature models (Std): -10°C to 60°C (14°F to 140°F). XT Industrial extended temperature models (Ind) : -40°C to 75°C (-40°F to 167°F)
Storage Temperature Range Minimum range of -25°C to 75°C (-13°F to 167°F). -40°C to 85°C (-40°F to 185°F) for industrial extended temperature models
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Maximum Heat Output 11.6 Btu/hr
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Metal with an IP20 ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit
Product Weight and Dimensions
Weight 0.61kg (1.34 lbs)
Dimensions (W x H x D) 45 x 130 x 121mm
Packaging
Shipping Weight 0.76kg (1.76 lbs)
Shipping Dimensions 170 x 260 x 70 mm
Standards and Certifications
Laser Safety EN 60825-1 Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.
Safety UL/EN/IEC 62368-1 CAN/CSA C22.2 No. 62368-1 UL 60950-1 IEC 60950-1:2005+A1:2009 and EN 60950-1:2006+A11:2009+A1:2010+A12:2011 CE Mark UL 61010-1 and UL 61010-2-201 (Standard for Safety for Programmable Controllers) UL508
Emissions FCC 47 Part 15 Class A CISPR 32 / EN 55032
Immunity CISPR 35 / EN 55035 IEC/EN 61000-4-2 (ESD) IEC/EN 61000-4-3 (RS) IEC/EN 61000-4-4 (EFT) IEC/EN 61000-4-5 (Surge) IEC/EN 61000-4-6 (CS) IEC/EN 61000-4-8 IEC/EN 61000-6-2 (General Immunity in Industrial Environments)
Hazardous Locations (Hazloc) ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D (formerly known as UL 1604) ATEX Class 1 Zone 2
Contents Shipped Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide