IDS-114HP PoE (90W) Switches

Perle IDS-114HP PoE Switches are designed for easy deployment in challenging industrial environments where extensive temperature tolerance, resistance to vibrations and shocks, and compliance with stringent safety standards are required. This low-cost, easy-to-use device combines essential industrial Ethernet networking functionality, real-time deterministic network operation, and advanced rugged performance. While it requires no configuration and will operate instantly as soon as you power it up, thebuilt-in QoS (Quality of Service) supportfor EtherNet/IP and PROFINET allows for traffic prioritization and effective management of resources.

This versatile switch features full/half-duplex auto-negotiation and auto MDI/MDIX operation, allowing for convenient connection of various network devices. The two SFP fiber ports enable flexible network configurations usingSFP transceivers supplied by Perle, Cisco, or other manufacturers of MSA-compliant SFPs.

In addition, these PoE Switches are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, the IDS-114HP has four ports that provide up to 90 watts of power to Powered Devices (PDs) such as outdoor PTZ dome cameras, wireless access points, and way-side communication devices. Learn moreabout PoE.

High reliability rugged design
for harsh environments
Real-time Ethernet performance
PoE
Energy Efficient Ethernet (EEE)

Specifications
5 Year Return to Factory Warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222612 ECCN: 5A991
Interfaces
RJ45 4 x 10/100/1000BASE-TX PoE up to 100 meters (328 ft) + 4 x 10/100/1000BASE-TX up to 100 meters (328 ft) + 2-port 100/1000BASE SFP Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
Small Form Factor Pluggable (SFP) slot(s) 2 empty SFP slot models for 100/1000Base-X SFP modules supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs
Alarm Contact One relay output with current 0.5A @ 48V at Normal Open or Normal Close
DIP Switches
Power
Dual Power Input 46-57VDC (Terminal Block 8 pins)
Power Consumption 9.72W (without PoE)
Maximum Current Consumption @24 vDC 0.20A @ 48VDC (without PoE)
Power Connector 8-Pin Removable Terminal Block
Overload Current Protection 10A fuse provides overload current protection
Reverse polarity protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
PoE Power Output Up to 90W/port Power Budget: 270W 46-57VDC for IEEE 802.3af type 1, ≤15.4W PD devices. 52-57VDC for IEEE 802.3at/bt type 2/3, 30W, 60W PD devices. 54-57VDC for IEEE 802.3bt, type 4, 90W PD devices
Switch Properties
Standards IEEE 802.3af/at/bt Power over Ethernet IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/FX IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Quality of Service (QoS) IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-SX/1000BASE-LX
Processing Type Store-and-Forward Auto Negotiation Half-duplex back-pressure and IEEE Auto MDI/MDIX
MAC Address Table Size 4K MAC
Packet Buffer Memory 1.5 Mbit
Jumbo Frame Size 9216 bytes
Forward/Filtering Rate 14,880pps for 10Mbps 148,810pps for 100Mbps 1,488,100pps for 1000Mbps
Indicators
Power LED 1 This LED is green when power is applied
Power LED 2 This LED is green when power is applied
Fault LED This LED is red when a fault is detected
RJ45 / SFP Ethernet LED These LED is solid green for established link and bllinks green when activity is detected (per port)
Environmental Specifications
Operating Temperature Ranges IDS-114HP: -10°C to 60°C (14°F to 140°F) IDS-114HP-XT: -40°C to 75°C (-40°F to 167°F)
Storage Temperature Range -40°C to 85°C (-40°F to 185°F)
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Metal with an IP30 ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Maximum Heat Output 33.17 BTU/Hr (without PoE)
MTBF 5184093 hours Calculation model based on MIL-HDBK-217-FN2 @ 25°C
Product Weight and Dimensions
Weight 578g / 1.27lbs
Dimensions 45 x 125 x 145 mm / 1.77 x 4.92 x 5.71 Inch (W x D x H)
Packaging
Shipping Weight 759g / 1.76lbs
Shipping Dimensions 235 x 185 x 65 mm / 9.25 x 7.28 x 2.56 Inch (W X D X H)
Contents Shipped Industrial Ethernet Switch with DIN Rail attachment Terminal block QR Code for online manuals
Standards and Certifications
Safety UL 61010
Emissions FCC Part 15 Class A VCCI Class A EN 61000-6-4 ICES-003 CISPR 32 / EN 55032
Immunity EN 61000-6-2 EN 61000-4-2 (ESD) EEN 61000-4-3 (Radiated RFI) EN 61000-4-4 (Burst) EN 61000-4-5 (Surge) EN 61000-4-6 (Induced RFI) EN 61000-4-8 (Magnetic field)
Industrial EN 50121-4
Environmental Test Compliance IEC 60068-2-6 Fc (Vibration) IEC 60068-2-27 Ea (Shock)