eX-SM110 Managed Fast Ethernet Extenders

10/100 Ethernet Extendersallow you to extend Ethernet services beyond the general IEEE 802.3 limits of 328ft / 100m usingany existing copper wiringpreviously used in alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV applications. For environments where the10/100 LAN is being extendedandnetwork security is critical, Perle offersManaged Fast Ethernet Extendersthat support allauthentication, authorization and accounting (AAA) securityservices used in corporate networks, including TACACS+, RADIUS, LDAP, Kerberos, NIS and RSA. To further protect ID’s and passwords from someone ‘snooping’ on the network, Perle Managed Ethernet Extenders providesecure management sessionsby supportingSSH, SNMPv3, Telnet and HTTPS. These types of features are used when managing your corporate firewalls, switches and routers. This is why Perle makes them available in theeX-SM110 Managed Ethernet Extender.

These simple and effective point to point Ethernet Copper Extenders are perfect for commercial buildings, residential units, hospitality environments and remote offices …anywhere you need the ability to securely configure, monitor and manage long range Ethernet communication linksbetween separated LANs or LAN devices (i.e. PCs, digital sensors, VoIP phones, WiFi Access Points, IP cameras and more). For high density applications check out theeX-CM110 Managed Fast Ethernet Extender Modules.

You will also appreciate how easy it is to set up theeX-SM110with an intuitive Web Manager GUI and multiple methods of access. And, with support for IPv6, Perle Managed Ethernet Extenders provide organizations with investment protection to meet this rapidly growing standard.

Extend Ethernet over twisted pair
Extend Ethernet over Coaxial cable
High-Speed Performance
Plug and Play operation
Link Pass-Through
Interlink Fault Feedback
Auto-Negotiation
Auto-MDIX
Fixed Speed and Duplex
VLAN
Transparent to IP Video compression protocols
VDSL Configuration
Quality of Service
VLAN Tagging
Unknown Multicast Frame filtering
Unknown Unicast Frame filtering
Unidirectional Ethernet
Configuration Mode selection
Converter Information
DIP switch settings

High Speed Asymmetric
Reach (Distance)		VDSL Rate (Mbps)
feet	meters	Downstream	Upstream
500	152	101	92
1000	305	101	63
1500	457	90	38
2000	610	62	24
2500	762	55	10
3000	914	42	5
3500	1000	35	3

High Speed Symmetric
Reach (Distance)		VDSL Rate (Mbps)
feet	meters	Downstream	Upstream
500	152	101	101
1000	305	85	101
1500	457	62	47
2000	610	60	29
2500	762	44	14
3000	914	30	7
3500	1000	29	4

Long Reach Symmetric
Reach (Distance)		VDSL Rate (Mbps)
feet	meters	Downstream	Upstream
500	152	53	44
1000	305	53	43
2500	762	39	18
4000	1219	25	4
5500	1676	17	1.9
7000	2134	8	2.3
7500	2286	7	2.2
8000	2438	5	2.2

Long Reach Asymmetric
Reach (Distance)		VDSL Rate (Mbps)
feet	meters	Downstream	Upstream
500	152	78	16
1000	305	78	16
2500	762	55	10
4000	1219	31	0.8
5500	1676	20	0.6
7000	2134	11	0.6
7500	2286	10	0.6
8000	2438	8	0.6

Specifications
Lifetime limited warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222608 ECCN: 5A992
CCATS Number: G134373
Management Module Indicators / reset
Power Blinking green during startup cycle Steady green: module has power and is ready Red : error
ALM Red alarm indicator activated when an alert event occurs
LKC Green indicator indicating an active Ethernet link. Blinking indicates RX and TX of data
100/1000 Green - 1000 Mbps link Yellow - 100 Mbps link Off - 10 Mbps or no Link
Reset button Recessed pinhole button resets module
Ethernet
Port 1 port RJ45 – 10/100 Base-TX - Shielded
Auto-MDIX Auto-MDIX enables proper operation with either straight-through or crossover cabling
Distance Distance up to 100 meters (328 feet) as per IEEE 802.3
Maximum Frame Size 1522 bytes
VDSL – Interlink
RJ45, BNC, Terminal Block Ethernet Extenders must be connected in pairs using unconditioned wire. Circuits that run through signal equalization equipment are not permitted. TIP and RING are polarity insensitive. Surge suppression of 400 volts between TIP and RING. Choice of RJ45, BNC or terminal block models for VDSL link connector: RJ45 – RING pin 4, TIP pin 5 (TIA 568 A/B) BNC – Coaxial 50 and 75 ohm cable with BNC connector Terminal Block – 2 position screw connectors for use with twisted pair telephone, alarm or serial cabling between 19 (0.9 mm) and 26 AWG (0.44 mm).
VDSL2 Line Rate/Reach Actual distance and rates experienced will depend on condition and gauge of wire used. This Rate/Reach table applies to 24 AWG (0.5 MM) twisted pair wiring on RJ45 (RJ) and terminal block (TB) models High Speed Asymmetric Reach (Distance) VDSL Rate (Mbps) feet meters Downstream Upstream 500 152 101 92 1000 305 101 63 1500 457 90 38 2000 610 62 24 2500 762 55 10 3000 914 42 5 3500 1000 35 3 High Speed Symmetric Reach (Distance) VDSL Rate (Mbps) feet meters Downstream Upstream 500 152 101 101 1000 305 85 101 1500 457 62 47 2000 610 60 29 2500 762 44 14 3000 914 30 7 3500 1000 29 4 Long Reach Symmetric Reach (Distance) VDSL Rate (Mbps) feet meters Downstream Upstream 500 152 53 44 1000 305 53 43 2500 762 39 18 4000 1219 25 4 5500 1676 17 1.9 7000 2134 8 2.3 7500 2286 7 2.2 8000 2438 5 2.2 Long Reach Asymmetric Reach (Distance) VDSL Rate (Mbps) feet meters Downstream Upstream 500 152 78 16 1000 305 78 16 2500 762 55 10 4000 1219 31 0.8 5500 1676 20 0.6 7000 2134 11 0.6 7500 2286 10 0.6 8000 2438 8 0.6
Indicators
Power / TST This green LED is turned on when power is applied to the Ethernet Extender. Otherwise it is off. The LED will blink when in Loopback test mode.
CO - Local Ethernet Extender is operating in CO VDSL mode
CPE - remote Ethernet Extender is operating in CPE VDSL mode
ILNK Indicates Link Status and activity on the Interlink (VDSL) port
ETH Indicates link status and activity on Ethernet port.
Switches – On-board PCB
Rate/Reach Two switches enable the user to select the right balance between speed and distance for their environment.
Signal to Noise Ratio Selectable Signal to Noise Ratio (SNR) of 6dB or 9dB. The higher SNR number provides better impulse noise protection but lowers performance.
Auto-Negotiation (802.3u) Enabled (Default) - The Ethernet Extender uses 802.3u Auto-negotiation on the 10/100Base-TX interface. It is set to advertise full duplex. Disabled - The Ethernet Extender sets the port according to the position of the speed and duplex switches.
Link Mode Standard (Default) - The 10/100Base-TX link remains active independent of the state of the Ethernet link on its remote peer. Link Pass-Through - the state of the 10/100Base-TX Ethernet connection is “passed through” or propagated across the VDSL link to the 10/100Base-TX Ethernet link on its remote Ethernet Extender peer. This enables a managed switch to report the state of the remote device to its network management system.
Interlink Fault Feedback Enabled - A loss of VDSL link will drop the 10/100 Ethernet port on each end until the link recovers Disabled (Down) - The state of the VDSL link is not propagated to the 10/100Base-TX port
Loopback Enabled - The VDSL interlink will perform a loopback function, retransmitting all received Ethernet frames back to its peer. Disabled (Default - Up)
Set Ethernet Speed When Auto-Negotiation switch is disabled, fixed speed can be set to 100 (Default) or 10
Set Ethernet Duplex When Auto-Negotiation switch is disabled, Duplex can be set to Full (Default) or Half
Power
Input Voltage 12 vDC (nominal)
Current 530ma @ 12 vDC
Power Consumption (Watts) 6.34
Power Connector 5.5mm x 9.5mm x 2.1mm barrel socket
AC Adapter 100-240v AC, regulated DC adapter included
Environmental Specifications
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature minimum range of -25°C to 70°C (-13°F to 158°F)
Operating Humidity 5% to 90% non-condensing
Storage Humidity 5% to 95% non-condensing
Operating Altitude Up to 3,048 meters (10,000 feet)
Heat Output (BTU/HR) 21.63
MTBF (Hours)* 221,305 Hours w/o adapter 156,656 Hours w/ adapter Calculation model based on MIL-HDBK-217-FN2 @ 30°C
Packaging
Shipping Weight 1.2 Kg, 2.6 lbs
Shipping Dimensions 200 x 300 x 70 mm, 7.9 x 11.8 x 2.8 inches
Regulatory Approvals
Emissions FCC Part 15 Class A CISPR 32 / EN 55032 EN61000-3-2
Immunity CISPR 35 / EN 55035
Electrical Safety UL/EN/IEC 62368-1 CAN/CSA C22.2 No. 62368-1 UL 60950-1 IEC 60950-1(ed 2); am1, am2 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 CE