eR-S1110 Ethernet Repeater

When you need to extend Ethernet services beyond the general IEEE 802.3 limits of 100m / 328ft, and new fiber cabling is cost prohibitive,the eR-S1110 Ethernet Repeateris the perfect solution.Transparently extend 10/100/1000 Ethernet connections across twisted pair(CAT5/6/7) to extend your network reach an additional 100m (328ft).

This simple and effective point to point Ethernet Repeater and Rate Converter is perfect for commercial buildings, residential units, hospitality environments or for connecting a remote office or private-network backbone to a corporate LAN. Use it anywhere you need Ethernet communication links between separated LANs or LAN devices (i.e. PCs, digital sensors, VoIP phones, WiFi APs, IP cameras and more).

The eR-S1110 Repeater can also operate as aPowered Device (PD) under IEEE 802.3afsupporting end-span and mid-span power sources (PSE). This makes it ideal for organizations that need to deploy equipment in locations that are difficult or too costly to have separate AC power installed such as ceilings, walls and kiosks.

Extend Ethernet over twisted pair
Rate Conversion
Plug and Play operation
Ethernet Link Pass-Through
Auto-Negotiation
Auto-MDIX
Jumbo Packets
VLAN
Transparent to IP Video compression protocols
Power Strain Relief strap

Specifications
Lifetime limited warranty Reach, RoHS and WEEE Compliant HTSUS Number: 8517.62.0020 UNSPSC Code: 43222608 ECCN: 5A991
Ethernet
Port 2 ports RJ45 – 10/100/1000 Base-T - Shielded
Auto-MDIX Auto-MDIX enables proper operation with either straight-through or crossover cabling
Distance Distance up to 100 meters (328 feet) as per IEEE 802.3
Maximum Frame Size 10240 bytes
Power
Input Supply Voltage 9 - 30 vDC, unregulated (12 vDC Nominal)
POE POE
Current 0.18 amps
Power Consumption 2.2 watts
Power Connector 5.5mm x 9.5mm x 2.1mm barrel socket
Back of product
Power Adapter
Universal AC/DC adapter 100-240v AC, regulated 12V DC adapter included
Indicators
Power This green LED is turned on when power is applied to the Ethernet Repeater. Otherwise it is off. The LED will blink when Hardware Fault.
ETH Indicates link status and activity on Ethernet port(s). G- on : On - Link at Gig Y - off : Flashing - Link and Activity G- on : On (both) - Link at 100M Y - off : Flashing - Link and Activity G- off : On - Link at 10M Y - on : Flashing - Link and Activity Slow Flashing - Alternate port link is down but this port is good
Switches
Link Mode Standard (Default)– The 10/100/1000 Base-T link remains active independent of the state of the Ethernet link on its remote peer. Link Pass-Through - the state of the 10/100/1000 Base-T Ethernet connection is 'passed through' or propagated to the 10/100/1000 Base-T Ethernet link on its remote Ethernet Repeater peer. This enables a managed switch to report the state of the remote device to its network management system.
Environmental Specifications
Operating Temperature -10°C to 50°C (14°F to 122°F)
Storage Temperature -25°C to 70°C (-13°F to 158°F)
Operating Humidity 5% to 90% non-condensing
Storage Humidity 5% to 95% non-condensing
Operating Altitude Up to 3,048 meters (10,000 feet)
Heat Output (BTU/HR) 7.5 BTU
MTBF (Hours)* Without power adaptor: 613,826 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30°C
Mounting
Wall or Panel Included
Din Rail Kit Optional
Product Weight and Dimensions
Weight 0.23 kg / 0.51 lbs
Dimensions 90 x 64 x 22 mm / 3.54 x 2.52 0.87 inches
Packaging
Shipping Weight 0.45 kg / 1 lbs
Shipping Dimensions 260 x 170 x 70 mm / 10 x 6.7 x 2.76 inches
Regulatory Approvals
Emissions FCC 47 Part 15 Class A EN55011 (CISPR11) CISPR 32 / EN 55032 EN61000-6-4 EN6100-4-2 (ESD): Contact EN61000-4-3 (RS) EN610004-4 (EFT) EN61000-4-5 (Surge): EN61000-4-6 (CS) EN 61000-4-8 (PFMF) EN 61000-4-11 EN61000-4-16
Immunity CISPR 35 / EN 55035
Electrical Safety UL/EN/IEC 62368-1 (previously 60950-1) CAN/CSA C22.2 No. 62368-1 CE